Contact

Welcome,
New User

Drywall and Ceiling Tile Installers

Apply plasterboard or other wallboard to ceilings or interior walls of buildings. Apply or mount acoustical tiles or blocks, strips, or sheets of shock-absorbing materials to ceilings and walls of buildings to reduce or reflect sound. Materials may be of decorative quality. Includes lathers who fasten wooden, metal, or rockboard lath to walls, ceilings, or partitions of buildings to provide support base for plaster, fireproofing, or acoustical material.

View All

    Work Activities

    Work Activities

    • Cut and screw together metal channels to make floor or ceiling frames, according to plans for the location of rooms or hallways.
    • Install horizontal and vertical metal or wooden studs to frames so that wallboard can be attached to interior walls.
    • Apply or mount acoustical tile or blocks, strips, or sheets of shock-absorbing materials to ceilings or walls of buildings to reduce reflection of sound or to decorate rooms.
    • Coordinate work with drywall finishers who cover the seams between drywall panels.
    • Hang dry lines to wall moldings to guide positioning of main runners.
    • Measure and mark surfaces to lay out work, according to blueprints or drawings, using tape measures, straightedges or squares, and marking devices.
    • Cut metal or wood framing and trim to size, using cutting tools.
    • Assemble or install metal framing or decorative trim for windows, doorways, or vents.
    • Remove existing plaster, drywall, or paneling, using crowbars and hammers.
    • Apply cement to backs of tiles and press tiles into place, aligning them with layout marks or joints of previously laid tile.
    • Hang drywall panels on metal frameworks of walls and ceilings in offices, schools, or other large buildings, using lifts or hoists to adjust panel heights, when necessary.
    • Install metal lath where plaster applications will be exposed to weather or water, or for curved or irregular surfaces.
    • Cut and screw together metal channels to make floor or ceiling frames, according to plans for the location of rooms or hallways.
    • Install blanket insulation between studs and tack plastic moisture barriers over insulation.
    • Measure and mark surfaces to lay out work, according to blueprints or drawings, using tape measures, straightedges or squares, and marking devices.
    • Read blueprints or other specifications to determine methods of installation, work procedures, or material or tool requirements.
    • Cut metal or wood framing and trim to size, using cutting tools.
    • Cut fixture or border tiles to size, using keyhole saws, and insert them into surrounding frameworks.
    • Measure and cut openings in panels or tiles for electrical outlets, windows, vents, plumbing, or other fixtures, using keyhole saws or other cutting tools.
    • Nail channels or wood furring strips to surfaces to provide mounting for tile.
    • Apply cement to backs of tiles and press tiles into place, aligning them with layout marks or joints of previously laid tile.
    • Install horizontal and vertical metal or wooden studs to frames so that wallboard can be attached to interior walls.
    • Mount tile, using adhesives, or by nailing, screwing, stapling, or wire-tying lath directly to structural frameworks.
    • Fasten metal or rockboard lath to the structural framework of walls, ceilings, or partitions of buildings, using nails, screws, staples, or wire-ties.
    • Scribe and cut edges of tile to fit walls where wall molding is not specified.
    • Wash concrete surfaces before mounting tile to increase adhesive qualities of surfaces, using washing soda and zinc sulfate solution.
    • Hang drywall panels on metal frameworks of walls and ceilings in offices, schools, or other large buildings, using lifts or hoists to adjust panel heights, when necessary.
    • Trim rough edges from wallboard to maintain even joints, using knives.
    • Suspend angle iron grids or channel irons from ceilings, using wire.
    • Measure and cut openings in panels or tiles for electrical outlets, windows, vents, plumbing, or other fixtures, using keyhole saws or other cutting tools.
    • Fit and fasten wallboard or drywall into position on wood or metal frameworks, using glue, nails, or screws.
    • Inspect furrings, mechanical mountings, or masonry surfaces for plumbness and level, using spirit or water levels.
    • Cut fixture or border tiles to size, using keyhole saws, and insert them into surrounding frameworks.
    • Seal joints between ceiling tiles and walls.

    Skills

    • Instructing

      Teaching people how to do something.

    • Complex Problem Solving

      Noticing a problem and figuring out the best way to solve it.

    • Speaking

      Talking to others.

    • Quality Control Analysis

      Testing how well a product or service works.

    • Reading Comprehension

      Reading work-related information.

    • Repairing

      Repairing machines or systems using the right tools.

    • Mathematics

      Using math to solve problems.

    • Writing

      Writing things for co-workers or customers.

    • Monitoring

      Keeping track of how well people and/or groups are doing in order to make improvements.

    • Persuasion

      Talking people into changing their minds or their behavior.

    • Active Listening

      Listening to others, not interrupting, and asking good questions.

    • Operations Monitoring

      Watching gauges, dials, or display screens to make sure a machine is working.

    • Operation and Control

      Using equipment or systems.

    • Management of Financial Resources

      Making spending decisions and keeping track of what is spent.

    • Social Perceptiveness

      Understanding people's reactions.

    • Negotiation

      Bringing people together to solve differences.

    • Equipment Maintenance

      Planning and doing the basic maintenance on equipment.

    • Troubleshooting

      Figuring out what is causing equipment, machines, wiring, or computer programs to not work.

    • Technology Design

      Making equipment and technology useful for customers.

    • Equipment Selection

      Deciding what kind of tools and equipment are needed to do a job.

    • Critical Thinking

      Thinking about the pros and cons of different ways to solve a problem.

    • Judgment and Decision Making

      Thinking about the pros and cons of different options and picking the best one.

    • Systems Analysis

      Figuring out how a system should work and how changes in the future will affect it.

    • Systems Evaluation

      Measuring how well a system is working and how to improve it.

    • Time Management

      Managing your time and the time of other people.

    • Management of Material Resources

      Managing equipment and materials.

    • Science

      Using scientific rules and strategies to solve problems.

    • Learning Strategies

      Using the best training or teaching strategies for learning new things.

    • Coordination

      Changing what is done based on other people's actions.

    • Programming

      Writing computer programs.

    • Active Learning

      Figuring out how to use new ideas or things.

    • Service Orientation

      Looking for ways to help people.

    • Operations Analysis

      Figuring out what a product or service needs to be able to do.

    • Installation

      Installing equipment, machines, wiring, or computer programs.

    • Management of Personnel Resources

      Selecting and managing the best workers for a job.

    WorkKeys®

    Applied Math
    4
    Workplace Documents
    3
    Graphic Literacy
    4

    Abilities

    • Sound Localization

      Noticing the direction that a sound came from.

    • Originality

      Creating new and original ideas.

    • Mathematical Reasoning

      Choosing the right type of math to solve a problem.

    • Memorization

      Remembering words, numbers, pictures, or steps.

    • Time Sharing

      Doing two or more things at the same time.

    • Number Facility

      Adding, subtracting, multiplying, or dividing.

    • Oral Expression

      Communicating by speaking.

    • Fluency of Ideas

      Coming up with lots of ideas.

    • Problem Sensitivity

      Noticing when problems happen.

    • Inductive Reasoning

      Making general rules or coming up with answers from lots of detailed information.

    • Night Vision

      Seeing at night or under low light.

    • Oral Comprehension

      Listening and understanding what people say.

    • Deductive Reasoning

      Using rules to solve problems.

    • Flexibility of Closure

      Seeing hidden patterns.

    • Glare Sensitivity

      Seeing something even if there is a glare or very bright light.

    • Speech Recognition

      Recognizing spoken words.

    • Speech Clarity

      Speaking clearly.

    • Written Comprehension

      Reading and understanding what is written.

    • Information Ordering

      Ordering or arranging things.

    • Perceptual Speed

      Quickly comparing groups of letters, numbers, pictures, or other things.

    • Stamina

      Exercising for a long time without getting out of breath.

    • Extent Flexibility

      Bending, stretching, twisting, or reaching with your body, arms, and/or legs.

    • Dynamic Flexibility

      Quickly and repeatedly bending, stretching, twisting, or reaching out with your body, arms, and/or legs.

    • Visualization

      Imagining how something will look after it is moved around or changed.

    • Selective Attention

      Paying attention to something without being distracted.

    • Arm-Hand Steadiness

      Keeping your arm or hand steady.

    • Manual Dexterity

      Holding or moving items with your hands.

    • Response Orientation

      Quickly deciding if you should move your hand, foot, or other body part.

    • Speed of Limb Movement

      Quickly moving your arms and legs.

    • Dynamic Strength

      Exercising for a long time without your muscles getting tired.

    • Trunk Strength

      Using your lower back and stomach.

    • Finger Dexterity

      Putting together small parts with your fingers.

    • Control Precision

      Quickly changing the controls of a machine, car, truck or boat.

    • Multilimb Coordination

      Using your arms and/or legs together while sitting, standing, or lying down.

    • Rate Control

      Changing when and how fast you move based on how something else is moving.

    • Reaction Time

      Quickly moving your hand, finger, or foot based on a sound, light, picture or other command.

    • Wrist-Finger Speed

      Making fast, simple, repeated movements of your fingers, hands, and wrists.

    • Static Strength

      Lifting, pushing, pulling, or carrying.

    • Explosive Strength

      Jumping, sprinting, or throwing something.

    • Hearing Sensitivity

      Telling the difference between sounds.

    • Written Expression

      Communicating by writing.

    • Category Flexibility

      Grouping things in different ways.

    • Speed of Closure

      Quickly knowing what you are looking at.

    • Spatial Orientation

      Knowing where things are around you.

    • Gross Body Coordination

      Moving your arms, legs, and mid-section together while your whole body is moving.

    • Gross Body Equilibrium

      Keeping your balance or staying upright.

    • Auditory Attention

      Paying attention to one sound while there are other distracting sounds.

    • Far Vision

      Seeing details that are far away.

    • Depth Perception

      Deciding which thing is closer or farther away from you, or deciding how far away it is from you.

    • Visual Color Discrimination

      Noticing the difference between colors, including shades and brightness.

    • Peripheral Vision

      Seeing something to your side when your are looking ahead.

    • Near Vision

      Seeing details up close.

    Knowledge

    • Therapy and Counseling

      Knowledge of principles, methods, and procedures for diagnosis, treatment, and rehabilitation of physical and mental dysfunctions, and for career counseling and guidance.

    • Foreign Language

      Knowledge of the structure and content of a foreign (non-English) language including the meaning and spelling of words, rules of composition and grammar, and pronunciation.

    • Public Safety and Security

      Knowledge of relevant equipment, policies, procedures, and strategies to promote effective local, state, or national security operations for the protection of people, data, property, and institutions.

    • Telecommunications

      Knowledge of transmission, broadcasting, switching, control, and operation of telecommunications systems.

    • Customer and Personal Service

      Knowledge of principles and processes for providing customer and personal services. This includes customer needs assessment, meeting quality standards for services, and evaluation of customer satisfaction.

    • Building and Construction

      Knowledge of materials, methods, and the tools involved in the construction or repair of houses, buildings, or other structures such as highways and roads.

    • Design

      Knowledge of design techniques, tools, and principles involved in production of precision technical plans, blueprints, drawings, and models.

    • Economics and Accounting

      Knowledge of economic and accounting principles and practices, the financial markets, banking, and the analysis and reporting of financial data.

    • Administration and Management

      Knowledge of business and management principles involved in strategic planning, resource allocation, human resources modeling, leadership technique, production methods, and coordination of people and resources.

    • Administrative

      Knowledge of administrative and office procedures and systems such as word processing, managing files and records, stenography and transcription, designing forms, and workplace terminology.

    • Transportation

      Knowledge of principles and methods for moving people or goods by air, rail, sea, or road, including the relative costs and benefits.

    • History and Archeology

      Knowledge of historical events and their causes, indicators, and effects on civilizations and cultures.

    • Communications and Media

      Knowledge of media production, communication, and dissemination techniques and methods. This includes alternative ways to inform and entertain via written, oral, and visual media.

    • English Language

      Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar.

    • Fine Arts

      Knowledge of the theory and techniques required to compose, produce, and perform works of music, dance, visual arts, drama, and sculpture.

    • Geography

      Knowledge of principles and methods for describing the features of land, sea, and air masses, including their physical characteristics, locations, interrelationships, and distribution of plant, animal, and human life.

    • Production and Processing

      Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods.

    • Mathematics

      Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications.

    • Sales and Marketing

      Knowledge of principles and methods for showing, promoting, and selling products or services. This includes marketing strategy and tactics, product demonstration, sales techniques, and sales control systems.

    • Personnel and Human Resources

      Knowledge of principles and procedures for personnel recruitment, selection, training, compensation and benefits, labor relations and negotiation, and personnel information systems.

    • Mechanical

      Knowledge of machines and tools, including their designs, uses, repair, and maintenance.

    • Computers and Electronics

      Knowledge of circuit boards, processors, chips, electronic equipment, and computer hardware and software, including applications and programming.

    • Chemistry

      Knowledge of the chemical composition, structure, and properties of substances and of the chemical processes and transformations that they undergo. This includes uses of chemicals and their interactions, danger signs, production techniques, and disposal methods.

    • Biology

      Knowledge of plant and animal organisms, their tissues, cells, functions, interdependencies, and interactions with each other and the environment.

    • Psychology

      Knowledge of human behavior and performance; individual differences in ability, personality, and interests; learning and motivation; psychological research methods; and the assessment and treatment of behavioral and affective disorders.

    • Sociology and Anthropology

      Knowledge of group behavior and dynamics, societal trends and influences, human migrations, ethnicity, cultures, and their history and origins.

    • Engineering and Technology

      Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to the design and production of various goods and services.

    • Food Production

      Knowledge of techniques and equipment for planting, growing, and harvesting food products (both plant and animal) for consumption, including storage/handling techniques.

    • Physics

      Knowledge and prediction of physical principles, laws, their interrelationships, and applications to understanding fluid, material, and atmospheric dynamics, and mechanical, electrical, atomic and sub-atomic structures and processes.

    • Law and Government

      Knowledge of laws, legal codes, court procedures, precedents, government regulations, executive orders, agency rules, and the democratic political process.

    • Medicine and Dentistry

      Knowledge of the information and techniques needed to diagnose and treat human injuries, diseases, and deformities. This includes symptoms, treatment alternatives, drug properties and interactions, and preventive health-care measures.

    • Education and Training

      Knowledge of principles and methods for curriculum and training design, teaching and instruction for individuals and groups, and the measurement of training effects.

    • Philosophy and Theology

      Knowledge of different philosophical systems and religions. This includes their basic principles, values, ethics, ways of thinking, customs, practices, and their impact on human culture.

    Career Video

    Video not available
    Additional videos and more information available on CareerOneStop

    Pay

    • Ohio Annual Salary 59560/yr
    • Typical Salary
    • Ohio Hourly Wage 28.64/hr
    • Typical Hourly Wage

    Ohio Employment Trends

    • Currently Employed 1,150
    • Yearly Projected Openings 100

    Typical Education

    Personality

    Realistic: People interested in this work like activities that include practical, hands-on problems and solutions.They do well at jobs that need:
    • Attention to Detail
    • Dependability
    • Cooperation
    • Integrity
    • Achievement/Effort
    • Self Control

    Tools

    • Air compressors
    • Caulking guns
    • Chalk lines
    • Glue guns
    • Hacksaw
    • Hammers
    • Hand sprayers
    • Hatchets
    • Hole saws
    • Jacks
    • Ladders
    • Laser printers
    • Levels
    • Lifts
    • Miter saw
    • Notebook computers
    • Pad or keyhole saw
    • Paint brushes
    • Personal computers
    • Personal digital assistant PDAs or organizers
    • Plaster or mortar mixers
    • Power drills
    • Power routers
    • Power sanders
    • Power saws
    • Power screwguns
    • Putty knives
    • Rasps
    • Respirators
    • Safety harnesses or belts
    • Saws
    • Scaffolding
    • Screwdrivers
    • Scribers
    • Spatulas
    • Staple guns
    • T squares
    • Tablet computers
    • Tape guide
    • Tape measures
    • Tinners snips
    • Trowels
    • Utility knives

    Technology

    • Accounting software
    • Data base user interface and query software
    • Office suite software
    • Operating system software
    • Optical character reader OCR or scanning software
    • Project management software
    • Word processing software

    Tags

    • Apprenticeships are available for this occupation. These programs can help you get hands-on experience and build your skills.
    Need help on researching occupations and careers? Download the Guide to Researching Occupations (PDF).

    Need help on how to research education and training programs? Download the Guide to Higher Education (PDF).

    Budget Calculator

    Answer a few questions to determine your target salary. Use this target salary to help choose the right occupation for you.

    Lifestyle Calculator

    Answer a few questions to determine your target salary. Use this target salary to help choose the right occupation for you.

    Workforce Supply Tool

    Workforce Supply Tool

    The Workforce Supply Tool provides statistics for the occupations in highest demand throughout Ohio.

    You can view statewide statistics as well as more region specific information.

    Visit Site
    Powered By: