An official State of Ohio site. Here’s how you know
Contact

Welcome,
New User

User: New User

Date: 04/10/2025

Tile and Stone Setters

Apply hard tile, stone, and comparable materials to walls, floors, ceilings, countertops, and roof decks.

View All

    Work Activities

    Work Activities

    • Cut, surface, polish, and install marble and granite or install pre-cast terrazzo, granite or marble units.
    • Mix and apply mortar or cement to edges and ends of drain tiles to seal halves and joints.
    • Spread mastic or other adhesive base on roof deck to form base for promenade tile, using serrated spreader.
    • Select and order tile and other items to be installed, such as bathroom accessories, walls, panels, and cabinets, according to specifications.
    • Measure and cut metal lath to size for walls and ceilings, using tin snips.
    • Level concrete and allow to dry.
    • Install and anchor fixtures in designated positions, using hand tools.
    • Finish and dress the joints and wipe excess grout from between tiles, using damp sponge.
    • Brush glue onto manila paper on which design has been drawn and position tiles, finished side down, onto paper.
    • Mix, apply, and spread plaster, concrete, mortar, cement, mastic, glue or other adhesives to form a bed for the tiles, using brush, trowel and screed.
    • Prepare surfaces for tiling by attaching lath or waterproof paper, or by applying a cement mortar coat to a metal screen.
    • Build underbeds and install anchor bolts, wires, and brackets.
    • Measure and mark surfaces to be tiled, following blueprints.
    • Remove any old tile, grout and adhesive using chisels and scrapers and clean the surface carefully.
    • Mix and apply mortar or cement to edges and ends of drain tiles to seal halves and joints.
    • Apply a sealer to make grout stain- and water-resistant.
    • Prepare cost and labor estimates, based on calculations of time and materials needed for project.
    • Finish and dress the joints and wipe excess grout from between tiles, using damp sponge.
    • Align and straighten tile using levels, squares, and straightedges.
    • Remove and replace cracked or damaged tile.
    • Measure and cut metal lath to size for walls and ceilings, using tin snips.
    • Cut, surface, polish, and install marble and granite or install pre-cast terrazzo, granite or marble units.
    • Mix, apply, and spread plaster, concrete, mortar, cement, mastic, glue or other adhesives to form a bed for the tiles, using brush, trowel and screed.
    • Study blueprints and examine surface to be covered to determine amount of material needed.
    • Mix, apply, and spread plaster, concrete, mortar, cement, mastic, glue or other adhesives to form a bed for the tiles, using brush, trowel and screed.
    • Prepare surfaces for tiling by attaching lath or waterproof paper, or by applying a cement mortar coat to a metal screen.
    • Lay and set mosaic tiles to create decorative wall, mural, and floor designs.
    • Select and order tile and other items to be installed, such as bathroom accessories, walls, panels, and cabinets, according to specifications.
    • Study blueprints and examine surface to be covered to determine amount of material needed.
    • Measure and mark surfaces to be tiled, following blueprints.
    • Remove any old tile, grout and adhesive using chisels and scrapers and clean the surface carefully.
    • Determine and implement the best layout to achieve a desired pattern.
    • Lay and set mosaic tiles to create decorative wall, mural, and floor designs.
    • Cut, surface, polish, and install marble and granite or install pre-cast terrazzo, granite or marble units.
    • Prepare cost and labor estimates, based on calculations of time and materials needed for project.
    • Apply mortar to tile back, position the tile, and press or tap with trowel handle to affix tile to base.
    • Apply mortar to tile back, position the tile, and press or tap with trowel handle to affix tile to base.
    • Cut and shape tile to fit around obstacles and into odd spaces and corners, using hand and power cutting tools.
    • Assist customers in selection of tile and grout.
    • Cut tile backing to required size, using shears.

    Skills

    • Operations Monitoring

      Watching gauges, dials, or display screens to make sure a machine is working.

    • Coordination

      Changing what is done based on other people's actions.

    • Mathematics

      Using math to solve problems.

    • Systems Evaluation

      Measuring how well a system is working and how to improve it.

    • Writing

      Writing things for co-workers or customers.

    • Persuasion

      Talking people into changing their minds or their behavior.

    • Critical Thinking

      Thinking about the pros and cons of different ways to solve a problem.

    • Repairing

      Repairing machines or systems using the right tools.

    • Time Management

      Managing your time and the time of other people.

    • Installation

      Installing equipment, machines, wiring, or computer programs.

    • Equipment Maintenance

      Planning and doing the basic maintenance on equipment.

    • Speaking

      Talking to others.

    • Complex Problem Solving

      Noticing a problem and figuring out the best way to solve it.

    • Judgment and Decision Making

      Thinking about the pros and cons of different options and picking the best one.

    • Instructing

      Teaching people how to do something.

    • Troubleshooting

      Figuring out what is causing equipment, machines, wiring, or computer programs to not work.

    • Management of Material Resources

      Managing equipment and materials.

    • Operation and Control

      Using equipment or systems.

    • Operations Analysis

      Figuring out what a product or service needs to be able to do.

    • Active Listening

      Listening to others, not interrupting, and asking good questions.

    • Social Perceptiveness

      Understanding people's reactions.

    • Active Learning

      Figuring out how to use new ideas or things.

    • Learning Strategies

      Using the best training or teaching strategies for learning new things.

    • Technology Design

      Making equipment and technology useful for customers.

    • Management of Financial Resources

      Making spending decisions and keeping track of what is spent.

    • Service Orientation

      Looking for ways to help people.

    • Equipment Selection

      Deciding what kind of tools and equipment are needed to do a job.

    • Negotiation

      Bringing people together to solve differences.

    • Quality Control Analysis

      Testing how well a product or service works.

    • Science

      Using scientific rules and strategies to solve problems.

    • Reading Comprehension

      Reading work-related information.

    • Systems Analysis

      Figuring out how a system should work and how changes in the future will affect it.

    • Programming

      Writing computer programs.

    • Monitoring

      Keeping track of how well people and/or groups are doing in order to make improvements.

    • Management of Personnel Resources

      Selecting and managing the best workers for a job.

    WorkKeys®

    Applied Math
    4
    Workplace Documents
    4
    Graphic Literacy
    4

    Abilities

    • Peripheral Vision

      Seeing something to your side when your are looking ahead.

    • Oral Comprehension

      Listening and understanding what people say.

    • Inductive Reasoning

      Making general rules or coming up with answers from lots of detailed information.

    • Stamina

      Exercising for a long time without getting out of breath.

    • Problem Sensitivity

      Noticing when problems happen.

    • Deductive Reasoning

      Using rules to solve problems.

    • Auditory Attention

      Paying attention to one sound while there are other distracting sounds.

    • Perceptual Speed

      Quickly comparing groups of letters, numbers, pictures, or other things.

    • Category Flexibility

      Grouping things in different ways.

    • Memorization

      Remembering words, numbers, pictures, or steps.

    • Response Orientation

      Quickly deciding if you should move your hand, foot, or other body part.

    • Dynamic Flexibility

      Quickly and repeatedly bending, stretching, twisting, or reaching out with your body, arms, and/or legs.

    • Speech Clarity

      Speaking clearly.

    • Speed of Limb Movement

      Quickly moving your arms and legs.

    • Rate Control

      Changing when and how fast you move based on how something else is moving.

    • Gross Body Coordination

      Moving your arms, legs, and mid-section together while your whole body is moving.

    • Explosive Strength

      Jumping, sprinting, or throwing something.

    • Control Precision

      Quickly changing the controls of a machine, car, truck or boat.

    • Speed of Closure

      Quickly knowing what you are looking at.

    • Oral Expression

      Communicating by speaking.

    • Time Sharing

      Doing two or more things at the same time.

    • Static Strength

      Lifting, pushing, pulling, or carrying.

    • Wrist-Finger Speed

      Making fast, simple, repeated movements of your fingers, hands, and wrists.

    • Gross Body Equilibrium

      Keeping your balance or staying upright.

    • Glare Sensitivity

      Seeing something even if there is a glare or very bright light.

    • Night Vision

      Seeing at night or under low light.

    • Trunk Strength

      Using your lower back and stomach.

    • Arm-Hand Steadiness

      Keeping your arm or hand steady.

    • Number Facility

      Adding, subtracting, multiplying, or dividing.

    • Written Comprehension

      Reading and understanding what is written.

    • Hearing Sensitivity

      Telling the difference between sounds.

    • Fluency of Ideas

      Coming up with lots of ideas.

    • Flexibility of Closure

      Seeing hidden patterns.

    • Information Ordering

      Ordering or arranging things.

    • Visualization

      Imagining how something will look after it is moved around or changed.

    • Multilimb Coordination

      Using your arms and/or legs together while sitting, standing, or lying down.

    • Extent Flexibility

      Bending, stretching, twisting, or reaching with your body, arms, and/or legs.

    • Far Vision

      Seeing details that are far away.

    • Sound Localization

      Noticing the direction that a sound came from.

    • Spatial Orientation

      Knowing where things are around you.

    • Originality

      Creating new and original ideas.

    • Dynamic Strength

      Exercising for a long time without your muscles getting tired.

    • Manual Dexterity

      Holding or moving items with your hands.

    • Speech Recognition

      Recognizing spoken words.

    • Visual Color Discrimination

      Noticing the difference between colors, including shades and brightness.

    • Finger Dexterity

      Putting together small parts with your fingers.

    • Depth Perception

      Deciding which thing is closer or farther away from you, or deciding how far away it is from you.

    • Reaction Time

      Quickly moving your hand, finger, or foot based on a sound, light, picture or other command.

    • Written Expression

      Communicating by writing.

    • Selective Attention

      Paying attention to something without being distracted.

    • Mathematical Reasoning

      Choosing the right type of math to solve a problem.

    • Near Vision

      Seeing details up close.

    Knowledge

    • Administration and Management

      Knowledge of business and management principles involved in strategic planning, resource allocation, human resources modeling, leadership technique, production methods, and coordination of people and resources.

    • Sociology and Anthropology

      Knowledge of group behavior and dynamics, societal trends and influences, human migrations, ethnicity, cultures, and their history and origins.

    • Geography

      Knowledge of principles and methods for describing the features of land, sea, and air masses, including their physical characteristics, locations, interrelationships, and distribution of plant, animal, and human life.

    • Therapy and Counseling

      Knowledge of principles, methods, and procedures for diagnosis, treatment, and rehabilitation of physical and mental dysfunctions, and for career counseling and guidance.

    • Sales and Marketing

      Knowledge of principles and methods for showing, promoting, and selling products or services. This includes marketing strategy and tactics, product demonstration, sales techniques, and sales control systems.

    • Communications and Media

      Knowledge of media production, communication, and dissemination techniques and methods. This includes alternative ways to inform and entertain via written, oral, and visual media.

    • Personnel and Human Resources

      Knowledge of principles and procedures for personnel recruitment, selection, training, compensation and benefits, labor relations and negotiation, and personnel information systems.

    • Biology

      Knowledge of plant and animal organisms, their tissues, cells, functions, interdependencies, and interactions with each other and the environment.

    • Fine Arts

      Knowledge of the theory and techniques required to compose, produce, and perform works of music, dance, visual arts, drama, and sculpture.

    • History and Archeology

      Knowledge of historical events and their causes, indicators, and effects on civilizations and cultures.

    • Public Safety and Security

      Knowledge of relevant equipment, policies, procedures, and strategies to promote effective local, state, or national security operations for the protection of people, data, property, and institutions.

    • Food Production

      Knowledge of techniques and equipment for planting, growing, and harvesting food products (both plant and animal) for consumption, including storage/handling techniques.

    • Computers and Electronics

      Knowledge of circuit boards, processors, chips, electronic equipment, and computer hardware and software, including applications and programming.

    • Design

      Knowledge of design techniques, tools, and principles involved in production of precision technical plans, blueprints, drawings, and models.

    • Building and Construction

      Knowledge of materials, methods, and the tools involved in the construction or repair of houses, buildings, or other structures such as highways and roads.

    • Physics

      Knowledge and prediction of physical principles, laws, their interrelationships, and applications to understanding fluid, material, and atmospheric dynamics, and mechanical, electrical, atomic and sub-atomic structures and processes.

    • Law and Government

      Knowledge of laws, legal codes, court procedures, precedents, government regulations, executive orders, agency rules, and the democratic political process.

    • Customer and Personal Service

      Knowledge of principles and processes for providing customer and personal services. This includes customer needs assessment, meeting quality standards for services, and evaluation of customer satisfaction.

    • Telecommunications

      Knowledge of transmission, broadcasting, switching, control, and operation of telecommunications systems.

    • Psychology

      Knowledge of human behavior and performance; individual differences in ability, personality, and interests; learning and motivation; psychological research methods; and the assessment and treatment of behavioral and affective disorders.

    • Mechanical

      Knowledge of machines and tools, including their designs, uses, repair, and maintenance.

    • Production and Processing

      Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods.

    • Chemistry

      Knowledge of the chemical composition, structure, and properties of substances and of the chemical processes and transformations that they undergo. This includes uses of chemicals and their interactions, danger signs, production techniques, and disposal methods.

    • Administrative

      Knowledge of administrative and office procedures and systems such as word processing, managing files and records, stenography and transcription, designing forms, and workplace terminology.

    • Philosophy and Theology

      Knowledge of different philosophical systems and religions. This includes their basic principles, values, ethics, ways of thinking, customs, practices, and their impact on human culture.

    • Economics and Accounting

      Knowledge of economic and accounting principles and practices, the financial markets, banking, and the analysis and reporting of financial data.

    • Engineering and Technology

      Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to the design and production of various goods and services.

    • Foreign Language

      Knowledge of the structure and content of a foreign (non-English) language including the meaning and spelling of words, rules of composition and grammar, and pronunciation.

    • Transportation

      Knowledge of principles and methods for moving people or goods by air, rail, sea, or road, including the relative costs and benefits.

    • Medicine and Dentistry

      Knowledge of the information and techniques needed to diagnose and treat human injuries, diseases, and deformities. This includes symptoms, treatment alternatives, drug properties and interactions, and preventive health-care measures.

    • Education and Training

      Knowledge of principles and methods for curriculum and training design, teaching and instruction for individuals and groups, and the measurement of training effects.

    • English Language

      Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar.

    • Mathematics

      Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications.

    Career Video

    Additional videos and more information available on CareerOneStop

    Pay

    • Ohio Annual Salary 48130/yr
    • Typical Salary
    • Ohio Hourly Wage 23.14/hr
    • Typical Hourly Wage

    Ohio Employment Trends

    • Currently Employed 1,620
    • Yearly Projected Openings 130

    Typical Education

    Personality

    Realistic: People interested in this work like activities that include practical, hands-on problems and solutions.They do well at jobs that need:
    • Attention to Detail
    • Dependability
    • Cooperation
    • Achievement/Effort
    • Integrity
    • Self Control

    Tools

    • Abrasive stones
    • Acoustic ear muffs or defenders
    • Adjustable widemouth pliers
    • Air compressors
    • Air exhausters
    • Angle grinder
    • Articulating boom lift
    • Bench vises
    • Blow torch
    • Caulking guns
    • Chalk lines
    • Claw hammer
    • Cold chisels
    • Concrete spreaders
    • Demolition hammers
    • Dust collectors
    • Ear plugs
    • Eyewashers or eye wash stations
    • Facial shields
    • Floats
    • Floor polishers
    • Floor scrapers
    • Floor scrubbers
    • Gas generators
    • Glue guns
    • Goggles
    • Hacksaw
    • Hammers
    • Hard hats
    • Ladders
    • Level sensors or transmitters
    • Levels
    • Lifelines or lifeline equipment
    • Mallets
    • Masks or accessories
    • Notebook computers
    • Personal computers
    • Plaster or mortar mixers
    • Plumb bobs
    • Pneumatic hammer
    • Power buffers
    • Power chippers
    • Power drills
    • Power grinders
    • Power routers
    • Power saws
    • Power screwguns
    • Protective gloves
    • Pry bars
    • Putty knives
    • Razor knives
    • Respirators
    • Safety glasses
    • Safety harnesses or belts
    • Scaffolding
    • Scarifiers
    • Scissor lift or lift table
    • Screwdrivers
    • Second cut file
    • Socket sets
    • Spatulas
    • Squares
    • Staple guns
    • Straight edges
    • Suction cups
    • Tape measures
    • Tile cutter
    • Tinners snips
    • Trowels
    • Utility knives
    • Wet or dry combination vacuum cleaners
    • Winches

    Technology

    • Computer aided design CAD software
    • Customer relationship management CRM software
    • Data base user interface and query software
    • Electronic mail software
    • Office suite software
    • Operating system software
    • Presentation software
    • Project management software
    • Spreadsheet software
    • Word processing software

    Tags

    • Apprenticeships are available for this occupation. These programs can help you get hands-on experience and build your skills.
    Need help on researching occupations and careers? Download the Guide to Researching Occupations (PDF).

    Need help on how to research education and training programs? Download the Guide to Higher Education (PDF).

    Budget Calculator

    Answer a few questions to determine your target salary. Use this target salary to help choose the right occupation for you.

    Lifestyle Calculator

    Answer a few questions to determine your target salary. Use this target salary to help choose the right occupation for you.

    Workforce Supply Tool

    Workforce Supply Tool

    The Workforce Supply Tool provides statistics for the occupations in highest demand throughout Ohio.

    You can view statewide statistics as well as more region specific information.

    Visit Site
    Powered By: