Contact

Welcome,
New User

Terrazzo Workers and Finishers

Apply a mixture of cement, sand, pigment, or marble chips to floors, stairways, and cabinet fixtures to fashion durable and decorative surfaces.

View All

    Work Activities

    Work Activities

    • Blend marble chip mixtures, place into panels, and push a roller over the surface to embed the chips.
    • Remove frames when the foundation is dry.
    • Wash polished terrazzo surface, using cleaner and water, and apply sealer and curing agent according to manufacturer's specifications, using brush or sprayer.
    • Chip, scrape, or grind high spots, ridges, or rough projections to finish concrete, using pneumatic chisel, hand chisel, or other hand tools.
    • Clean chipped area, using wire brush, and feel and observe surface to determine if it is rough or uneven.
    • Repair concrete by cutting out damaged areas, drilling holes for reinforcing rods, and positioning reinforcing rods, using power saw and drill.
    • Precast terrazzo blocks in wooden forms.
    • Wet concrete surface and rub with stone to smooth surface and obtain specified finish.
    • Spread roofing paper on surface of foundation and spread concrete onto roofing paper with trowel to form terrazzo base.
    • Position and secure moisture membrane and wire mesh in preparation for pouring base materials for terrazzo installation.
    • Grind surfaces with a power grinder, or polish surfaces with polishing or surfacing machines.
    • Blend marble chip mixtures, place into panels, and push a roller over the surface to embed the chips.
    • Measure designated amounts of ingredients for terrazzo or grout, according to standard formulas and specifications, using graduated containers and scales, and load ingredients into portable mixer.
    • Cut metal division strips and press them into the terrazzo base for joints or changes of color to form designs or patterns or to help prevent cracks.
    • Produce rough concrete surface, using broom.
    • Signal truck driver to position truck to facilitate pouring concrete and move chute to direct concrete on forms.
    • Wash polished terrazzo surface, using cleaner and water, and apply sealer and curing agent according to manufacturer's specifications, using brush or sprayer.
    • Spread, level, or smooth concrete or terrazzo mixtures to form bases or finished surfaces, using rakes, shovels, hand or power trowels, hand or power screeds, or floats.
    • Mix cement, sand, and water to produce concrete, grout, or slurry, using hoe, trowel, tamper, scraper, or concrete-mixing machine.
    • Mold expansion joints and edges, using edging tools, jointers, or straightedges.
    • Move terrazzo installation materials, tools, machines, or work devices to work areas, manually or using wheelbarrow.
    • Repair concrete by cutting out damaged areas, drilling holes for reinforcing rods, and positioning reinforcing rods, using power saw and drill.
    • Build wooden molds, clamping molds around areas to be repaired, or setting up frames to the proper depth and alignment.
    • Build wooden molds, clamping molds around areas to be repaired, or setting up frames to the proper depth and alignment.
    • Fill slight grinding depressions with matching grout material and hand-trowel for a smooth, uniform surface.
    • Clean installation site, mixing and storage areas, tools, machines, and equipment, and store materials and equipment.
    • Sprinkle colored marble or stone chips, powdered steel, or coloring powder over surface to produce prescribed finish.
    • Modify mixing, grouting, grinding, or cleaning procedures, according to type of installation or material used.
    • Signal truck driver to position truck to facilitate pouring concrete and move chute to direct concrete on forms.
    • Measure designated amounts of ingredients for terrazzo or grout, according to standard formulas and specifications, using graduated containers and scales, and load ingredients into portable mixer.
    • Measure designated amounts of ingredients for terrazzo or grout, according to standard formulas and specifications, using graduated containers and scales, and load ingredients into portable mixer.
    • Cut metal division strips and press them into the terrazzo base for joints or changes of color to form designs or patterns or to help prevent cracks.
    • Spread, level, or smooth concrete or terrazzo mixtures to form bases or finished surfaces, using rakes, shovels, hand or power trowels, hand or power screeds, or floats.
    • Grind curved surfaces or areas inaccessible to surfacing machine, such as stairways or cabinet tops, with portable hand grinder.
    • Repair concrete by cutting out damaged areas, drilling holes for reinforcing rods, and positioning reinforcing rods, using power saw and drill.
    • Spread roofing paper on surface of foundation and spread concrete onto roofing paper with trowel to form terrazzo base.
    • Clean installation site, mixing and storage areas, tools, machines, and equipment, and store materials and equipment.
    • Wet surface to prepare for bonding, fill holes and cracks with grout or slurry, and smooth with a trowel.
    • Wet surface to prepare for bonding, fill holes and cracks with grout or slurry, and smooth with a trowel.
    • Wet surface to prepare for bonding, fill holes and cracks with grout or slurry, and smooth with a trowel.

    Skills

    • Operations Analysis

      Figuring out what a product or service needs to be able to do.

    • Negotiation

      Bringing people together to solve differences.

    • Active Learning

      Figuring out how to use new ideas or things.

    • Learning Strategies

      Using the best training or teaching strategies for learning new things.

    • Monitoring

      Keeping track of how well people and/or groups are doing in order to make improvements.

    • Systems Analysis

      Figuring out how a system should work and how changes in the future will affect it.

    • Judgment and Decision Making

      Thinking about the pros and cons of different options and picking the best one.

    • Speaking

      Talking to others.

    • Systems Evaluation

      Measuring how well a system is working and how to improve it.

    • Management of Personnel Resources

      Selecting and managing the best workers for a job.

    • Active Listening

      Listening to others, not interrupting, and asking good questions.

    • Installation

      Installing equipment, machines, wiring, or computer programs.

    • Equipment Selection

      Deciding what kind of tools and equipment are needed to do a job.

    • Critical Thinking

      Thinking about the pros and cons of different ways to solve a problem.

    • Persuasion

      Talking people into changing their minds or their behavior.

    • Equipment Maintenance

      Planning and doing the basic maintenance on equipment.

    • Repairing

      Repairing machines or systems using the right tools.

    • Time Management

      Managing your time and the time of other people.

    • Mathematics

      Using math to solve problems.

    • Reading Comprehension

      Reading work-related information.

    • Instructing

      Teaching people how to do something.

    • Science

      Using scientific rules and strategies to solve problems.

    • Social Perceptiveness

      Understanding people's reactions.

    • Coordination

      Changing what is done based on other people's actions.

    • Technology Design

      Making equipment and technology useful for customers.

    • Troubleshooting

      Figuring out what is causing equipment, machines, wiring, or computer programs to not work.

    • Management of Material Resources

      Managing equipment and materials.

    • Writing

      Writing things for co-workers or customers.

    • Service Orientation

      Looking for ways to help people.

    • Programming

      Writing computer programs.

    • Management of Financial Resources

      Making spending decisions and keeping track of what is spent.

    • Complex Problem Solving

      Noticing a problem and figuring out the best way to solve it.

    • Operations Monitoring

      Watching gauges, dials, or display screens to make sure a machine is working.

    • Operation and Control

      Using equipment or systems.

    • Quality Control Analysis

      Testing how well a product or service works.

    WorkKeys®

    Applied Math
    4
    Workplace Documents
    4
    Graphic Literacy
    4

    Abilities

    • Memorization

      Remembering words, numbers, pictures, or steps.

    • Auditory Attention

      Paying attention to one sound while there are other distracting sounds.

    • Wrist-Finger Speed

      Making fast, simple, repeated movements of your fingers, hands, and wrists.

    • Trunk Strength

      Using your lower back and stomach.

    • Stamina

      Exercising for a long time without getting out of breath.

    • Number Facility

      Adding, subtracting, multiplying, or dividing.

    • Speed of Closure

      Quickly knowing what you are looking at.

    • Oral Comprehension

      Listening and understanding what people say.

    • Flexibility of Closure

      Seeing hidden patterns.

    • Speech Clarity

      Speaking clearly.

    • Visual Color Discrimination

      Noticing the difference between colors, including shades and brightness.

    • Depth Perception

      Deciding which thing is closer or farther away from you, or deciding how far away it is from you.

    • Reaction Time

      Quickly moving your hand, finger, or foot based on a sound, light, picture or other command.

    • Dynamic Strength

      Exercising for a long time without your muscles getting tired.

    • Extent Flexibility

      Bending, stretching, twisting, or reaching with your body, arms, and/or legs.

    • Near Vision

      Seeing details up close.

    • Originality

      Creating new and original ideas.

    • Deductive Reasoning

      Using rules to solve problems.

    • Category Flexibility

      Grouping things in different ways.

    • Mathematical Reasoning

      Choosing the right type of math to solve a problem.

    • Selective Attention

      Paying attention to something without being distracted.

    • Perceptual Speed

      Quickly comparing groups of letters, numbers, pictures, or other things.

    • Far Vision

      Seeing details that are far away.

    • Night Vision

      Seeing at night or under low light.

    • Peripheral Vision

      Seeing something to your side when your are looking ahead.

    • Glare Sensitivity

      Seeing something even if there is a glare or very bright light.

    • Hearing Sensitivity

      Telling the difference between sounds.

    • Control Precision

      Quickly changing the controls of a machine, car, truck or boat.

    • Multilimb Coordination

      Using your arms and/or legs together while sitting, standing, or lying down.

    • Response Orientation

      Quickly deciding if you should move your hand, foot, or other body part.

    • Rate Control

      Changing when and how fast you move based on how something else is moving.

    • Speed of Limb Movement

      Quickly moving your arms and legs.

    • Static Strength

      Lifting, pushing, pulling, or carrying.

    • Explosive Strength

      Jumping, sprinting, or throwing something.

    • Dynamic Flexibility

      Quickly and repeatedly bending, stretching, twisting, or reaching out with your body, arms, and/or legs.

    • Gross Body Coordination

      Moving your arms, legs, and mid-section together while your whole body is moving.

    • Gross Body Equilibrium

      Keeping your balance or staying upright.

    • Problem Sensitivity

      Noticing when problems happen.

    • Inductive Reasoning

      Making general rules or coming up with answers from lots of detailed information.

    • Information Ordering

      Ordering or arranging things.

    • Time Sharing

      Doing two or more things at the same time.

    • Arm-Hand Steadiness

      Keeping your arm or hand steady.

    • Spatial Orientation

      Knowing where things are around you.

    • Written Comprehension

      Reading and understanding what is written.

    • Oral Expression

      Communicating by speaking.

    • Written Expression

      Communicating by writing.

    • Fluency of Ideas

      Coming up with lots of ideas.

    • Visualization

      Imagining how something will look after it is moved around or changed.

    • Finger Dexterity

      Putting together small parts with your fingers.

    • Sound Localization

      Noticing the direction that a sound came from.

    • Speech Recognition

      Recognizing spoken words.

    • Manual Dexterity

      Holding or moving items with your hands.

    Knowledge

    • Transportation

      Knowledge of principles and methods for moving people or goods by air, rail, sea, or road, including the relative costs and benefits.

    • Sales and Marketing

      Knowledge of principles and methods for showing, promoting, and selling products or services. This includes marketing strategy and tactics, product demonstration, sales techniques, and sales control systems.

    • Design

      Knowledge of design techniques, tools, and principles involved in production of precision technical plans, blueprints, drawings, and models.

    • Computers and Electronics

      Knowledge of circuit boards, processors, chips, electronic equipment, and computer hardware and software, including applications and programming.

    • Mathematics

      Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications.

    • Medicine and Dentistry

      Knowledge of the information and techniques needed to diagnose and treat human injuries, diseases, and deformities. This includes symptoms, treatment alternatives, drug properties and interactions, and preventive health-care measures.

    • Philosophy and Theology

      Knowledge of different philosophical systems and religions. This includes their basic principles, values, ethics, ways of thinking, customs, practices, and their impact on human culture.

    • Education and Training

      Knowledge of principles and methods for curriculum and training design, teaching and instruction for individuals and groups, and the measurement of training effects.

    • Public Safety and Security

      Knowledge of relevant equipment, policies, procedures, and strategies to promote effective local, state, or national security operations for the protection of people, data, property, and institutions.

    • English Language

      Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar.

    • Law and Government

      Knowledge of laws, legal codes, court procedures, precedents, government regulations, executive orders, agency rules, and the democratic political process.

    • Psychology

      Knowledge of human behavior and performance; individual differences in ability, personality, and interests; learning and motivation; psychological research methods; and the assessment and treatment of behavioral and affective disorders.

    • Building and Construction

      Knowledge of materials, methods, and the tools involved in the construction or repair of houses, buildings, or other structures such as highways and roads.

    • Administrative

      Knowledge of administrative and office procedures and systems such as word processing, managing files and records, stenography and transcription, designing forms, and workplace terminology.

    • Geography

      Knowledge of principles and methods for describing the features of land, sea, and air masses, including their physical characteristics, locations, interrelationships, and distribution of plant, animal, and human life.

    • Fine Arts

      Knowledge of the theory and techniques required to compose, produce, and perform works of music, dance, visual arts, drama, and sculpture.

    • History and Archeology

      Knowledge of historical events and their causes, indicators, and effects on civilizations and cultures.

    • Food Production

      Knowledge of techniques and equipment for planting, growing, and harvesting food products (both plant and animal) for consumption, including storage/handling techniques.

    • Physics

      Knowledge and prediction of physical principles, laws, their interrelationships, and applications to understanding fluid, material, and atmospheric dynamics, and mechanical, electrical, atomic and sub-atomic structures and processes.

    • Mechanical

      Knowledge of machines and tools, including their designs, uses, repair, and maintenance.

    • Communications and Media

      Knowledge of media production, communication, and dissemination techniques and methods. This includes alternative ways to inform and entertain via written, oral, and visual media.

    • Chemistry

      Knowledge of the chemical composition, structure, and properties of substances and of the chemical processes and transformations that they undergo. This includes uses of chemicals and their interactions, danger signs, production techniques, and disposal methods.

    • Sociology and Anthropology

      Knowledge of group behavior and dynamics, societal trends and influences, human migrations, ethnicity, cultures, and their history and origins.

    • Economics and Accounting

      Knowledge of economic and accounting principles and practices, the financial markets, banking, and the analysis and reporting of financial data.

    • Engineering and Technology

      Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to the design and production of various goods and services.

    • Biology

      Knowledge of plant and animal organisms, their tissues, cells, functions, interdependencies, and interactions with each other and the environment.

    • Customer and Personal Service

      Knowledge of principles and processes for providing customer and personal services. This includes customer needs assessment, meeting quality standards for services, and evaluation of customer satisfaction.

    • Production and Processing

      Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods.

    • Administration and Management

      Knowledge of business and management principles involved in strategic planning, resource allocation, human resources modeling, leadership technique, production methods, and coordination of people and resources.

    • Therapy and Counseling

      Knowledge of principles, methods, and procedures for diagnosis, treatment, and rehabilitation of physical and mental dysfunctions, and for career counseling and guidance.

    • Personnel and Human Resources

      Knowledge of principles and procedures for personnel recruitment, selection, training, compensation and benefits, labor relations and negotiation, and personnel information systems.

    • Foreign Language

      Knowledge of the structure and content of a foreign (non-English) language including the meaning and spelling of words, rules of composition and grammar, and pronunciation.

    • Telecommunications

      Knowledge of transmission, broadcasting, switching, control, and operation of telecommunications systems.

    Career Video

    Additional videos and more information available on CareerOneStop

    Pay

    • US Annual Salary 52330/yr
    • US Typical Salary
    • US Hourly Wage 25.16/hr
    • US Typical Hourly Wage

    Ohio Employment Trends

    • Currently Employed 1,400
    • Yearly Projected Openings 100

    Typical Education

    Personality

    Realistic: People interested in this work like activities that include practical, hands-on problems and solutions.They do well at jobs that need:
    • Attention to Detail
    • Cooperation
    • Self Control
    • Dependability
    • Initiative
    • Achievement/Effort

    Tools

    • C clamps
    • Claw hammer
    • Concrete spreaders
    • Desktop computers
    • Edgers
    • Floats
    • Goggles
    • Grinding or polishing machines
    • Hand sprayers
    • Masks or accessories
    • Notebook computers
    • Plaster or mortar mixers
    • Pneumatic hammer
    • Power buffers
    • Power drills
    • Power grinders
    • Power sanders
    • Power saws
    • Pressure or steam cleaners
    • Putty knives
    • Shears
    • Shovels
    • Stonemason chisel
    • Straight edges
    • Trowels
    • Wire brushes

    Technology

    • Accounting software
    • Analytical or scientific software
    • Operating system software
    • Project management software
    • Spreadsheet software

    Tags

    • Apprenticeships are available for this occupation. These programs can help you get hands-on experience and build your skills.
    Need help on researching occupations and careers? Download the Guide to Researching Occupations (PDF).

    Need help on how to research education and training programs? Download the Guide to Higher Education (PDF).

    Budget Calculator

    Answer a few questions to determine your target salary. Use this target salary to help choose the right occupation for you.

    Lifestyle Calculator

    Answer a few questions to determine your target salary. Use this target salary to help choose the right occupation for you.

    Workforce Supply Tool

    Workforce Supply Tool

    The Workforce Supply Tool provides statistics for the occupations in highest demand throughout Ohio.

    You can view statewide statistics as well as more region specific information.

    Visit Site
    Powered By: