Contact

Welcome,
New User

Control and Valve Installers and Repairers, Except Mechanical Door

Install, repair, and maintain mechanical regulating and controlling devices, such as electric meters, gas regulators, thermostats, safety and flow valves, and other mechanical governors.

View All

    Work Activities

    Work Activities

    • Cut seats to receive new orifices, tap inspection ports, and perform other repairs to salvage usable materials, using hand tools and machine tools.
    • Turn valves to allow measured amounts of air or gas to pass through meters at specified flow rates.
    • Recondition displacement type gas meters and governors, fabricating, machining, or modifying parts needed for repairs.
    • Clean internal compartments and moving parts, using rags and cleaning compounds.
    • Dismantle meters, and replace or adjust defective parts such as cases, shafts, gears, disks, and recording mechanisms, using soldering irons and hand tools.
    • Attach air hoses to meter inlets, plug outlets, and observe gauges for pressure losses to test internal seams for leaks.
    • Recommend and write up specifications for changes in hardware, such as house wiring.
    • Clamp regulator units into vises on stages above water tanks, and attach compressed air hoses to intake ports.
    • Advise customers on proper installation of valves or regulators and related equipment.
    • Calibrate thermostats for specified temperature or pressure settings.
    • Dismantle meters, and replace or adjust defective parts such as cases, shafts, gears, disks, and recording mechanisms, using soldering irons and hand tools.
    • Disassemble and repair mechanical control devices or valves, such as regulators, thermostats, or hydrants, using power tools, hand tools, and cutting torches.
    • Make adjustments to meter components, such as setscrews or timing mechanisms, so that they conform to specifications.
    • Collect money due on delinquent accounts.
    • Attach pressurized meters to fixtures which submerge them in water, and observe meters for leaks.
    • Disconnect or remove defective or unauthorized meters, using hand tools.
    • Lubricate wearing surfaces of mechanical parts, using oils or other lubricants.
    • Record meter readings and installation data on meter cards, work orders, or field service orders, or enter data into hand-held computers.
    • Connect regulators to test stands, and turn screw adjustments until gauges indicate that inlet and outlet pressures meet specifications.
    • Record meter readings and installation data on meter cards, work orders, or field service orders, or enter data into hand-held computers.
    • Install, inspect and test electric meters, relays, and power sources to detect causes of malfunctions and inaccuracies, using hand tools and testing equipment.
    • Shut off service and notify repair crews when major repairs are required, such as the replacement of underground pipes or wiring.
    • Repair electric meters and components, such as transformers and relays, and replace metering devices, dial glasses, and faulty or incorrect wiring, using hand tools.
    • Install, inspect and test electric meters, relays, and power sources to detect causes of malfunctions and inaccuracies, using hand tools and testing equipment.
    • Shut off service and notify repair crews when major repairs are required, such as the replacement of underground pipes or wiring.
    • Vary air pressure flowing into regulators and turn handles to assess functioning of valves and pistons.
    • Disassemble and repair mechanical control devices or valves, such as regulators, thermostats, or hydrants, using power tools, hand tools, and cutting torches.
    • Test valves and regulators for leaks and accurate temperature and pressure settings, using precision testing equipment.
    • Install regulators and related equipment such as gas meters, odorization units, and gas pressure telemetering equipment.
    • Connect hoses from provers to meter inlets and outlets, and raise prover bells until prover gauges register zero.
    • Trace and tag meters or house lines.
    • Clean plant growth, scale, paint, soil, or rust from meter housings, using wire brushes, scrapers, buffers, sandblasters, or cleaning compounds.
    • Install, inspect and test electric meters, relays, and power sources to detect causes of malfunctions and inaccuracies, using hand tools and testing equipment.
    • Turn meters on or off to establish or close service.
    • Report hazardous field situations and damaged or missing meters.
    • Investigate instances of illegal tapping into service lines.
    • Replace defective parts, such as bellows, range springs, and toggle switches, and reassemble units according to blueprints, using cam presses and hand tools.
    • Measure tolerances of assembled and salvageable parts for conformance to standards or specifications, using gauges, micrometers, and calipers.
    • Dismantle meters, and replace or adjust defective parts such as cases, shafts, gears, disks, and recording mechanisms, using soldering irons and hand tools.
    • Reassemble repaired equipment, and solder top, front, and back case panels in place, using soldering guns, power tools, and hand tools.
    • Reassemble repaired equipment, and solder top, front, and back case panels in place, using soldering guns, power tools, and hand tools.
    • Repair leaks in valve seats or bellows of automotive heater thermostats, using soft solder, flux, and acetylene torches.
    • Splice and connect cables from meters or current transformers to pull boxes or switchboards, using hand tools.
    • Calibrate instrumentation, such as meters, gauges, and regulators, for pressure, temperature, flow, and level.
    • Connect regulators to test stands, and turn screw adjustments until gauges indicate that inlet and outlet pressures meet specifications.
    • Mount and install meters and other electric equipment such as time clocks, transformers, and circuit breakers, using electricians' hand tools.
    • Record maintenance information, including test results, material usage, and repairs made.
    • Examine valves or mechanical control device parts for defects, dents, or loose attachments, and mark malfunctioning areas of defective units.

    Skills

    • Mathematics

      Using math to solve problems.

    • Persuasion

      Talking people into changing their minds or their behavior.

    • Negotiation

      Bringing people together to solve differences.

    • Technology Design

      Making equipment and technology useful for customers.

    • Equipment Selection

      Deciding what kind of tools and equipment are needed to do a job.

    • Writing

      Writing things for co-workers or customers.

    • Reading Comprehension

      Reading work-related information.

    • Active Learning

      Figuring out how to use new ideas or things.

    • Management of Personnel Resources

      Selecting and managing the best workers for a job.

    • Management of Financial Resources

      Making spending decisions and keeping track of what is spent.

    • Judgment and Decision Making

      Thinking about the pros and cons of different options and picking the best one.

    • Active Listening

      Listening to others, not interrupting, and asking good questions.

    • Quality Control Analysis

      Testing how well a product or service works.

    • Learning Strategies

      Using the best training or teaching strategies for learning new things.

    • Equipment Maintenance

      Planning and doing the basic maintenance on equipment.

    • Coordination

      Changing what is done based on other people's actions.

    • Complex Problem Solving

      Noticing a problem and figuring out the best way to solve it.

    • Critical Thinking

      Thinking about the pros and cons of different ways to solve a problem.

    • Repairing

      Repairing machines or systems using the right tools.

    • Management of Material Resources

      Managing equipment and materials.

    • Programming

      Writing computer programs.

    • Operations Monitoring

      Watching gauges, dials, or display screens to make sure a machine is working.

    • Operation and Control

      Using equipment or systems.

    • Systems Evaluation

      Measuring how well a system is working and how to improve it.

    • Troubleshooting

      Figuring out what is causing equipment, machines, wiring, or computer programs to not work.

    • Time Management

      Managing your time and the time of other people.

    • Speaking

      Talking to others.

    • Social Perceptiveness

      Understanding people's reactions.

    • Instructing

      Teaching people how to do something.

    • Service Orientation

      Looking for ways to help people.

    • Operations Analysis

      Figuring out what a product or service needs to be able to do.

    • Installation

      Installing equipment, machines, wiring, or computer programs.

    • Monitoring

      Keeping track of how well people and/or groups are doing in order to make improvements.

    • Systems Analysis

      Figuring out how a system should work and how changes in the future will affect it.

    • Science

      Using scientific rules and strategies to solve problems.

    WorkKeys®

    Applied Math
    4
    Workplace Documents
    4
    Graphic Literacy
    4

    Abilities

    • Response Orientation

      Quickly deciding if you should move your hand, foot, or other body part.

    • Reaction Time

      Quickly moving your hand, finger, or foot based on a sound, light, picture or other command.

    • Static Strength

      Lifting, pushing, pulling, or carrying.

    • Explosive Strength

      Jumping, sprinting, or throwing something.

    • Dynamic Strength

      Exercising for a long time without your muscles getting tired.

    • Stamina

      Exercising for a long time without getting out of breath.

    • Extent Flexibility

      Bending, stretching, twisting, or reaching with your body, arms, and/or legs.

    • Glare Sensitivity

      Seeing something even if there is a glare or very bright light.

    • Hearing Sensitivity

      Telling the difference between sounds.

    • Speech Recognition

      Recognizing spoken words.

    • Oral Expression

      Communicating by speaking.

    • Number Facility

      Adding, subtracting, multiplying, or dividing.

    • Mathematical Reasoning

      Choosing the right type of math to solve a problem.

    • Originality

      Creating new and original ideas.

    • Memorization

      Remembering words, numbers, pictures, or steps.

    • Spatial Orientation

      Knowing where things are around you.

    • Perceptual Speed

      Quickly comparing groups of letters, numbers, pictures, or other things.

    • Rate Control

      Changing when and how fast you move based on how something else is moving.

    • Speed of Limb Movement

      Quickly moving your arms and legs.

    • Dynamic Flexibility

      Quickly and repeatedly bending, stretching, twisting, or reaching out with your body, arms, and/or legs.

    • Far Vision

      Seeing details that are far away.

    • Depth Perception

      Deciding which thing is closer or farther away from you, or deciding how far away it is from you.

    • Auditory Attention

      Paying attention to one sound while there are other distracting sounds.

    • Sound Localization

      Noticing the direction that a sound came from.

    • Speech Clarity

      Speaking clearly.

    • Arm-Hand Steadiness

      Keeping your arm or hand steady.

    • Finger Dexterity

      Putting together small parts with your fingers.

    • Visualization

      Imagining how something will look after it is moved around or changed.

    • Flexibility of Closure

      Seeing hidden patterns.

    • Written Comprehension

      Reading and understanding what is written.

    • Information Ordering

      Ordering or arranging things.

    • Written Expression

      Communicating by writing.

    • Time Sharing

      Doing two or more things at the same time.

    • Manual Dexterity

      Holding or moving items with your hands.

    • Control Precision

      Quickly changing the controls of a machine, car, truck or boat.

    • Wrist-Finger Speed

      Making fast, simple, repeated movements of your fingers, hands, and wrists.

    • Trunk Strength

      Using your lower back and stomach.

    • Gross Body Coordination

      Moving your arms, legs, and mid-section together while your whole body is moving.

    • Gross Body Equilibrium

      Keeping your balance or staying upright.

    • Near Vision

      Seeing details up close.

    • Visual Color Discrimination

      Noticing the difference between colors, including shades and brightness.

    • Night Vision

      Seeing at night or under low light.

    • Peripheral Vision

      Seeing something to your side when your are looking ahead.

    • Inductive Reasoning

      Making general rules or coming up with answers from lots of detailed information.

    • Problem Sensitivity

      Noticing when problems happen.

    • Speed of Closure

      Quickly knowing what you are looking at.

    • Category Flexibility

      Grouping things in different ways.

    • Selective Attention

      Paying attention to something without being distracted.

    • Fluency of Ideas

      Coming up with lots of ideas.

    • Oral Comprehension

      Listening and understanding what people say.

    • Deductive Reasoning

      Using rules to solve problems.

    • Multilimb Coordination

      Using your arms and/or legs together while sitting, standing, or lying down.

    Knowledge

    • Sociology and Anthropology

      Knowledge of group behavior and dynamics, societal trends and influences, human migrations, ethnicity, cultures, and their history and origins.

    • Geography

      Knowledge of principles and methods for describing the features of land, sea, and air masses, including their physical characteristics, locations, interrelationships, and distribution of plant, animal, and human life.

    • Medicine and Dentistry

      Knowledge of the information and techniques needed to diagnose and treat human injuries, diseases, and deformities. This includes symptoms, treatment alternatives, drug properties and interactions, and preventive health-care measures.

    • Therapy and Counseling

      Knowledge of principles, methods, and procedures for diagnosis, treatment, and rehabilitation of physical and mental dysfunctions, and for career counseling and guidance.

    • Foreign Language

      Knowledge of the structure and content of a foreign (non-English) language including the meaning and spelling of words, rules of composition and grammar, and pronunciation.

    • Telecommunications

      Knowledge of transmission, broadcasting, switching, control, and operation of telecommunications systems.

    • Public Safety and Security

      Knowledge of relevant equipment, policies, procedures, and strategies to promote effective local, state, or national security operations for the protection of people, data, property, and institutions.

    • English Language

      Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar.

    • Law and Government

      Knowledge of laws, legal codes, court procedures, precedents, government regulations, executive orders, agency rules, and the democratic political process.

    • Transportation

      Knowledge of principles and methods for moving people or goods by air, rail, sea, or road, including the relative costs and benefits.

    • Administration and Management

      Knowledge of business and management principles involved in strategic planning, resource allocation, human resources modeling, leadership technique, production methods, and coordination of people and resources.

    • Food Production

      Knowledge of techniques and equipment for planting, growing, and harvesting food products (both plant and animal) for consumption, including storage/handling techniques.

    • Mathematics

      Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications.

    • Physics

      Knowledge and prediction of physical principles, laws, their interrelationships, and applications to understanding fluid, material, and atmospheric dynamics, and mechanical, electrical, atomic and sub-atomic structures and processes.

    • Biology

      Knowledge of plant and animal organisms, their tissues, cells, functions, interdependencies, and interactions with each other and the environment.

    • Psychology

      Knowledge of human behavior and performance; individual differences in ability, personality, and interests; learning and motivation; psychological research methods; and the assessment and treatment of behavioral and affective disorders.

    • Philosophy and Theology

      Knowledge of different philosophical systems and religions. This includes their basic principles, values, ethics, ways of thinking, customs, practices, and their impact on human culture.

    • Communications and Media

      Knowledge of media production, communication, and dissemination techniques and methods. This includes alternative ways to inform and entertain via written, oral, and visual media.

    • History and Archeology

      Knowledge of historical events and their causes, indicators, and effects on civilizations and cultures.

    • Sales and Marketing

      Knowledge of principles and methods for showing, promoting, and selling products or services. This includes marketing strategy and tactics, product demonstration, sales techniques, and sales control systems.

    • Personnel and Human Resources

      Knowledge of principles and procedures for personnel recruitment, selection, training, compensation and benefits, labor relations and negotiation, and personnel information systems.

    • Building and Construction

      Knowledge of materials, methods, and the tools involved in the construction or repair of houses, buildings, or other structures such as highways and roads.

    • Mechanical

      Knowledge of machines and tools, including their designs, uses, repair, and maintenance.

    • Customer and Personal Service

      Knowledge of principles and processes for providing customer and personal services. This includes customer needs assessment, meeting quality standards for services, and evaluation of customer satisfaction.

    • Economics and Accounting

      Knowledge of economic and accounting principles and practices, the financial markets, banking, and the analysis and reporting of financial data.

    • Production and Processing

      Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods.

    • Computers and Electronics

      Knowledge of circuit boards, processors, chips, electronic equipment, and computer hardware and software, including applications and programming.

    • Engineering and Technology

      Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to the design and production of various goods and services.

    • Design

      Knowledge of design techniques, tools, and principles involved in production of precision technical plans, blueprints, drawings, and models.

    • Administrative

      Knowledge of administrative and office procedures and systems such as word processing, managing files and records, stenography and transcription, designing forms, and workplace terminology.

    • Chemistry

      Knowledge of the chemical composition, structure, and properties of substances and of the chemical processes and transformations that they undergo. This includes uses of chemicals and their interactions, danger signs, production techniques, and disposal methods.

    • Education and Training

      Knowledge of principles and methods for curriculum and training design, teaching and instruction for individuals and groups, and the measurement of training effects.

    • Fine Arts

      Knowledge of the theory and techniques required to compose, produce, and perform works of music, dance, visual arts, drama, and sculpture.

    Career Video

    Additional videos and more information available on CareerOneStop

    Pay

    • Ohio Annual Salary 74630/yr
    • Typical Salary
    • Ohio Hourly Wage 35.88/hr
    • Typical Hourly Wage

    Ohio Employment Trends

    • Currently Employed 1,110
    • Yearly Projected Openings 90

    Typical Education

    Personality

    Realistic: People interested in this work like activities that include practical, hands-on problems and solutions.They do well at jobs that need:
    • Attention to Detail
    • Dependability
    • Independence
    • Integrity
    • Initiative
    • Cooperation

    Tools

    • Adjustable widemouth pliers
    • Adjustable wrenches
    • Air compressors
    • Ammeters
    • Articulating boom lift
    • Bench vises
    • Blow torch
    • Calipers
    • Circuit tester
    • Claw hammer
    • Cold chisels
    • Conduit benders
    • Cutting die
    • Desktop computers
    • Diagonal cut pliers
    • End cut pliers
    • Fish tape
    • Flowmeters
    • Forklifts
    • Frequency calibrator or simulator
    • Grease guns
    • Hacksaw
    • Hydraulic pumps
    • Hydraulic truck cranes
    • Impact wrenches
    • Infrared imagers
    • Insulated screwdriver
    • Ladders
    • Levels
    • Linemans pliers
    • Locking pliers
    • Longnose pliers
    • Micrometers
    • Mill saw file
    • Multimeters
    • Notebook computers
    • Nut drivers
    • Open end wrenches
    • Pad or keyhole saw
    • Paint application system
    • Paint sprayers
    • Personal computers
    • Phasemeters
    • Pipe or tube cutter
    • Pipe wrenches
    • Pneumatic sanding machines
    • Portable data input terminals
    • Power drills
    • Power grinders
    • Power saws
    • Power screwguns
    • Pressure indicators
    • Protective gloves
    • Punches or nail sets or drifts
    • Radio frequency transmitters or receivers
    • Rasps
    • Razor knives
    • Rivet tools
    • Saws
    • Scaffolding
    • Screwdrivers
    • Slip or groove joint pliers
    • Soldering iron
    • Specialty wrenches
    • Spot welding machine
    • Squares
    • Stripping tools
    • Tape measures
    • Taps
    • Tongs
    • Track cranes
    • Two way radios
    • Utility knives
    • Voltage or current meters
    • Wattmeters
    • Wire brushes
    • Wire cutters
    • Wire lug crimping tool
    • Wire or cable cutter

    Technology

    • Analytical or scientific software
    • Cloud-based data access and sharing software
    • Computer aided design CAD software
    • Data base user interface and query software
    • Development environment software
    • Electronic mail software
    • Enterprise resource planning ERP software
    • Graphical user interface development software
    • Industrial control software
    • Office suite software
    • Operating system software
    • Presentation software
    • Process mapping and design software
    • Project management software
    • Spreadsheet software
    • Word processing software

    Tags

    • Apprenticeships are available for this occupation. These programs can help you get hands-on experience and build your skills.
    Need help on researching occupations and careers? Download the Guide to Researching Occupations (PDF).

    Need help on how to research education and training programs? Download the Guide to Higher Education (PDF).

    Budget Calculator

    Answer a few questions to determine your target salary. Use this target salary to help choose the right occupation for you.

    Lifestyle Calculator

    Answer a few questions to determine your target salary. Use this target salary to help choose the right occupation for you.

    Workforce Supply Tool

    Workforce Supply Tool

    The Workforce Supply Tool provides statistics for the occupations in highest demand throughout Ohio.

    You can view statewide statistics as well as more region specific information.

    Visit Site
    Powered By: