Contact

Welcome,
New User

Textile Winding, Twisting, and Drawing Out Machine Setters, Operators, and Tenders

Set up, operate, or tend machines that wind or twist textiles; or draw out and combine sliver, such as wool, hemp, or synthetic fibers. Includes slubber machine and drawing frame operators.

View All

    Work Activities

    Work Activities

    • Operate machines for test runs to verify adjustments and to obtain product samples.
    • Study guides, samples, charts, and specification sheets, or confer with supervisors or engineering staff to determine setup requirements.
    • Install, level, and align machine components such as gears, chains, guides, dies, cutters, or needles to set up machinery for operation.
    • Inspect machinery to determine whether repairs are needed.
    • Clean, oil, and lubricate machines, using air hoses, cleaning solutions, rags, oilcans, and grease guns.
    • Start machines, monitor operation, and make adjustments as needed.
    • Remove spindles from machines and bobbins from spindles.
    • Study guides, samples, charts, and specification sheets, or confer with supervisors or engineering staff to determine setup requirements.
    • Measure bobbins periodically, using gauges, and turn screws to adjust tension if bobbins are not of specified size.
    • Tend machines that wind wire onto bobbins, preparatory to formation of wire netting used in reinforcing sheet glass.
    • Replace depleted supply packages with full packages.
    • Inspect products to verify that they meet specifications and to determine whether machine adjustment is needed.
    • Observe bobbins as they are winding and cut threads to remove loaded bobbins, using knives.
    • Tend machines with multiple winding units that wind thread onto shuttle bobbins for use on sewing machines or other kinds of bobbins for sole-stitching, knitting, or weaving machinery.
    • Record production data such as numbers and types of bobbins wound.
    • Adjust machine settings such as speed or tension to produce products that meet specifications.
    • Stop machines when specified amount of products has been produced.
    • Tend machines that twist together two or more strands of yarn or insert additional twists into single strands of yarn to increase strength, smoothness, or uniformity of yarn.
    • Place bobbins on spindles and insert spindles into bobbin-winding machines.
    • Repair or replace worn or defective parts or components, using hand tools.
    • Notify supervisors or mechanics of equipment malfunctions.
    • Install, level, and align machine components such as gears, chains, guides, dies, cutters, or needles to set up machinery for operation.
    • Observe operations to detect defects, malfunctions, or supply shortages.
    • Tend spinning frames that draw out and twist roving or sliver into yarn.
    • Install, level, and align machine components such as gears, chains, guides, dies, cutters, or needles to set up machinery for operation.
    • Observe bobbins as they are winding and cut threads to remove loaded bobbins, using knives.
    • Thread yarn, thread, or fabric through guides, needles, and rollers of machines.
    • Unwind lengths of yarn, thread, or twine from spools and wind onto bobbins.
    • Remove spindles from machines and bobbins from spindles.
    • Repair or replace worn or defective parts or components, using hand tools.
    • Clean, oil, and lubricate machines, using air hoses, cleaning solutions, rags, oilcans, and grease guns.

    Skills

    • Management of Personnel Resources

      Selecting and managing the best workers for a job.

    • Management of Material Resources

      Managing equipment and materials.

    • Management of Financial Resources

      Making spending decisions and keeping track of what is spent.

    • Negotiation

      Bringing people together to solve differences.

    • Persuasion

      Talking people into changing their minds or their behavior.

    • Monitoring

      Keeping track of how well people and/or groups are doing in order to make improvements.

    • Systems Analysis

      Figuring out how a system should work and how changes in the future will affect it.

    • Learning Strategies

      Using the best training or teaching strategies for learning new things.

    • Judgment and Decision Making

      Thinking about the pros and cons of different options and picking the best one.

    • Complex Problem Solving

      Noticing a problem and figuring out the best way to solve it.

    • Coordination

      Changing what is done based on other people's actions.

    • Active Learning

      Figuring out how to use new ideas or things.

    • Time Management

      Managing your time and the time of other people.

    • Mathematics

      Using math to solve problems.

    • Technology Design

      Making equipment and technology useful for customers.

    • Critical Thinking

      Thinking about the pros and cons of different ways to solve a problem.

    • Troubleshooting

      Figuring out what is causing equipment, machines, wiring, or computer programs to not work.

    • Programming

      Writing computer programs.

    • Installation

      Installing equipment, machines, wiring, or computer programs.

    • Science

      Using scientific rules and strategies to solve problems.

    • Operations Monitoring

      Watching gauges, dials, or display screens to make sure a machine is working.

    • Instructing

      Teaching people how to do something.

    • Writing

      Writing things for co-workers or customers.

    • Equipment Maintenance

      Planning and doing the basic maintenance on equipment.

    • Quality Control Analysis

      Testing how well a product or service works.

    • Reading Comprehension

      Reading work-related information.

    • Equipment Selection

      Deciding what kind of tools and equipment are needed to do a job.

    • Operation and Control

      Using equipment or systems.

    • Repairing

      Repairing machines or systems using the right tools.

    • Systems Evaluation

      Measuring how well a system is working and how to improve it.

    • Active Listening

      Listening to others, not interrupting, and asking good questions.

    • Service Orientation

      Looking for ways to help people.

    • Speaking

      Talking to others.

    • Social Perceptiveness

      Understanding people's reactions.

    • Operations Analysis

      Figuring out what a product or service needs to be able to do.

    WorkKeys®

    Applied Math
    4
    Workplace Documents
    4
    Graphic Literacy
    4

    Abilities

    • Perceptual Speed

      Quickly comparing groups of letters, numbers, pictures, or other things.

    • Visualization

      Imagining how something will look after it is moved around or changed.

    • Reaction Time

      Quickly moving your hand, finger, or foot based on a sound, light, picture or other command.

    • Explosive Strength

      Jumping, sprinting, or throwing something.

    • Near Vision

      Seeing details up close.

    • Finger Dexterity

      Putting together small parts with your fingers.

    • Multilimb Coordination

      Using your arms and/or legs together while sitting, standing, or lying down.

    • Dynamic Strength

      Exercising for a long time without your muscles getting tired.

    • Stamina

      Exercising for a long time without getting out of breath.

    • Oral Comprehension

      Listening and understanding what people say.

    • Written Expression

      Communicating by writing.

    • Depth Perception

      Deciding which thing is closer or farther away from you, or deciding how far away it is from you.

    • Sound Localization

      Noticing the direction that a sound came from.

    • Oral Expression

      Communicating by speaking.

    • Written Comprehension

      Reading and understanding what is written.

    • Deductive Reasoning

      Using rules to solve problems.

    • Control Precision

      Quickly changing the controls of a machine, car, truck or boat.

    • Speed of Limb Movement

      Quickly moving your arms and legs.

    • Flexibility of Closure

      Seeing hidden patterns.

    • Spatial Orientation

      Knowing where things are around you.

    • Dynamic Flexibility

      Quickly and repeatedly bending, stretching, twisting, or reaching out with your body, arms, and/or legs.

    • Visual Color Discrimination

      Noticing the difference between colors, including shades and brightness.

    • Originality

      Creating new and original ideas.

    • Speech Recognition

      Recognizing spoken words.

    • Speech Clarity

      Speaking clearly.

    • Mathematical Reasoning

      Choosing the right type of math to solve a problem.

    • Fluency of Ideas

      Coming up with lots of ideas.

    • Category Flexibility

      Grouping things in different ways.

    • Number Facility

      Adding, subtracting, multiplying, or dividing.

    • Speed of Closure

      Quickly knowing what you are looking at.

    • Time Sharing

      Doing two or more things at the same time.

    • Manual Dexterity

      Holding or moving items with your hands.

    • Response Orientation

      Quickly deciding if you should move your hand, foot, or other body part.

    • Trunk Strength

      Using your lower back and stomach.

    • Extent Flexibility

      Bending, stretching, twisting, or reaching with your body, arms, and/or legs.

    • Memorization

      Remembering words, numbers, pictures, or steps.

    • Selective Attention

      Paying attention to something without being distracted.

    • Arm-Hand Steadiness

      Keeping your arm or hand steady.

    • Rate Control

      Changing when and how fast you move based on how something else is moving.

    • Wrist-Finger Speed

      Making fast, simple, repeated movements of your fingers, hands, and wrists.

    • Static Strength

      Lifting, pushing, pulling, or carrying.

    • Gross Body Coordination

      Moving your arms, legs, and mid-section together while your whole body is moving.

    • Gross Body Equilibrium

      Keeping your balance or staying upright.

    • Far Vision

      Seeing details that are far away.

    • Problem Sensitivity

      Noticing when problems happen.

    • Information Ordering

      Ordering or arranging things.

    • Night Vision

      Seeing at night or under low light.

    • Peripheral Vision

      Seeing something to your side when your are looking ahead.

    • Glare Sensitivity

      Seeing something even if there is a glare or very bright light.

    • Hearing Sensitivity

      Telling the difference between sounds.

    • Auditory Attention

      Paying attention to one sound while there are other distracting sounds.

    • Inductive Reasoning

      Making general rules or coming up with answers from lots of detailed information.

    Knowledge

    • Sales and Marketing

      Knowledge of principles and methods for showing, promoting, and selling products or services. This includes marketing strategy and tactics, product demonstration, sales techniques, and sales control systems.

    • Psychology

      Knowledge of human behavior and performance; individual differences in ability, personality, and interests; learning and motivation; psychological research methods; and the assessment and treatment of behavioral and affective disorders.

    • Foreign Language

      Knowledge of the structure and content of a foreign (non-English) language including the meaning and spelling of words, rules of composition and grammar, and pronunciation.

    • Communications and Media

      Knowledge of media production, communication, and dissemination techniques and methods. This includes alternative ways to inform and entertain via written, oral, and visual media.

    • History and Archeology

      Knowledge of historical events and their causes, indicators, and effects on civilizations and cultures.

    • Computers and Electronics

      Knowledge of circuit boards, processors, chips, electronic equipment, and computer hardware and software, including applications and programming.

    • Economics and Accounting

      Knowledge of economic and accounting principles and practices, the financial markets, banking, and the analysis and reporting of financial data.

    • Fine Arts

      Knowledge of the theory and techniques required to compose, produce, and perform works of music, dance, visual arts, drama, and sculpture.

    • Transportation

      Knowledge of principles and methods for moving people or goods by air, rail, sea, or road, including the relative costs and benefits.

    • Biology

      Knowledge of plant and animal organisms, their tissues, cells, functions, interdependencies, and interactions with each other and the environment.

    • Chemistry

      Knowledge of the chemical composition, structure, and properties of substances and of the chemical processes and transformations that they undergo. This includes uses of chemicals and their interactions, danger signs, production techniques, and disposal methods.

    • Public Safety and Security

      Knowledge of relevant equipment, policies, procedures, and strategies to promote effective local, state, or national security operations for the protection of people, data, property, and institutions.

    • Law and Government

      Knowledge of laws, legal codes, court procedures, precedents, government regulations, executive orders, agency rules, and the democratic political process.

    • Telecommunications

      Knowledge of transmission, broadcasting, switching, control, and operation of telecommunications systems.

    • Mathematics

      Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications.

    • Medicine and Dentistry

      Knowledge of the information and techniques needed to diagnose and treat human injuries, diseases, and deformities. This includes symptoms, treatment alternatives, drug properties and interactions, and preventive health-care measures.

    • Philosophy and Theology

      Knowledge of different philosophical systems and religions. This includes their basic principles, values, ethics, ways of thinking, customs, practices, and their impact on human culture.

    • Engineering and Technology

      Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to the design and production of various goods and services.

    • Administrative

      Knowledge of administrative and office procedures and systems such as word processing, managing files and records, stenography and transcription, designing forms, and workplace terminology.

    • Production and Processing

      Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods.

    • Personnel and Human Resources

      Knowledge of principles and procedures for personnel recruitment, selection, training, compensation and benefits, labor relations and negotiation, and personnel information systems.

    • Administration and Management

      Knowledge of business and management principles involved in strategic planning, resource allocation, human resources modeling, leadership technique, production methods, and coordination of people and resources.

    • Food Production

      Knowledge of techniques and equipment for planting, growing, and harvesting food products (both plant and animal) for consumption, including storage/handling techniques.

    • Customer and Personal Service

      Knowledge of principles and processes for providing customer and personal services. This includes customer needs assessment, meeting quality standards for services, and evaluation of customer satisfaction.

    • Building and Construction

      Knowledge of materials, methods, and the tools involved in the construction or repair of houses, buildings, or other structures such as highways and roads.

    • Sociology and Anthropology

      Knowledge of group behavior and dynamics, societal trends and influences, human migrations, ethnicity, cultures, and their history and origins.

    • Mechanical

      Knowledge of machines and tools, including their designs, uses, repair, and maintenance.

    • Geography

      Knowledge of principles and methods for describing the features of land, sea, and air masses, including their physical characteristics, locations, interrelationships, and distribution of plant, animal, and human life.

    • Education and Training

      Knowledge of principles and methods for curriculum and training design, teaching and instruction for individuals and groups, and the measurement of training effects.

    • English Language

      Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar.

    • Design

      Knowledge of design techniques, tools, and principles involved in production of precision technical plans, blueprints, drawings, and models.

    • Physics

      Knowledge and prediction of physical principles, laws, their interrelationships, and applications to understanding fluid, material, and atmospheric dynamics, and mechanical, electrical, atomic and sub-atomic structures and processes.

    • Therapy and Counseling

      Knowledge of principles, methods, and procedures for diagnosis, treatment, and rehabilitation of physical and mental dysfunctions, and for career counseling and guidance.

    Career Video

    Video not available
    Additional videos and more information available on CareerOneStop

    Pay

    • Ohio Annual Salary 30450/yr
    • Typical Salary
    • Ohio Hourly Wage 14.64/hr
    • Typical Hourly Wage

    Ohio Employment Trends

    • Currently Employed 470
    • Yearly Projected Openings 50

    Typical Education

    Personality

    Realistic: People interested in this work like activities that include practical, hands-on problems and solutions.They do well at jobs that need:
    • Independence
    • Dependability
    • Integrity
    • Attention to Detail
    • Self Control
    • Stress Tolerance

    Tools

    • Adjustable wrenches
    • Air compressors
    • Carding machine
    • Dating or numbering machines
    • Dyeing machines
    • Extruders
    • Fine spinning machine
    • Gage block set
    • Grease guns
    • Hand trucks or accessories
    • Jacks
    • Oil can
    • Photocopiers
    • Processing tanks
    • Reeling or unreeling machines
    • Screwdrivers
    • Sewing machines
    • Spinning machines
    • Textile testing instruments
    • Twisting machines
    • Warping machine
    • Weaving machines
    • Winding or reeling or spooling machines

    Technology

    • Computer aided manufacturing CAM software
    • Electronic mail software
    • Office suite software
    • Spreadsheet software
    • Word processing software

    Tags

    • Apprenticeships are available for this occupation. These programs can help you get hands-on experience and build your skills.
    Need help on researching occupations and careers? Download the Guide to Researching Occupations (PDF).

    Need help on how to research education and training programs? Download the Guide to Higher Education (PDF).

    Budget Calculator

    Answer a few questions to determine your target salary. Use this target salary to help choose the right occupation for you.

    Lifestyle Calculator

    Answer a few questions to determine your target salary. Use this target salary to help choose the right occupation for you.

    Workforce Supply Tool

    Workforce Supply Tool

    The Workforce Supply Tool provides statistics for the occupations in highest demand throughout Ohio.

    You can view statewide statistics as well as more region specific information.

    Visit Site
    Powered By: